ponds with the middle frequency of each plug-in
(a) SWEEP SELECTOR switch to CW
(b) FUNCTION START-STOP push-
button pressed. (FUNCTION
F pressed for
and 115 vac output.
(3) Electronic counter indicates between the
(c) All AMPLITUDE MOD pushbutton
limits specified on that line of the tables.
released.
(d) ALC pushbutton released.
PL-1240/USM-so8 (v)
(e) STOP/AF control to maximum clock-
wise.
NOTE
Refer to the power indication in table
5-3 and use an
attenuator between the
units above 30 mw.
(3) Turn UUT POWER LEVEL control to
midrange.
trol to settings listed in table 5-2. Electronic
counter indicates within specified limits.
b. Adjustments.
trol to settinge listed in table 5-2. Adjust UUT
adjustment listed (fig. 5-1) for specified elec-
tronic counter indication.
(2) Adjustments interact. Repeat adjust-
ment step (1) until no further adjustment is re-
quired.
(3) Repeat performance check.
a. Performance Check.
trol for electronic counter indication that corres-
EL6625-2402-35/1-TB-5-1
Figure 5-1. Typical RF
plug-in unit, adjustment
locations.
30