TB 9-4910-556-35
5. Accessories Required. The
accessories listed in
table 3 are issued as
indicated in
paragraph 4 above and
are used in this
calibration procedure. When necessary, these items
may be substituted by equivalent items, unless specifically prohibited.
Table 2. Minimum Specifications of
Equipment Required
Manufacturer and model
Common name
Minimum use specifications
(Part number)
Holt, Model 250 (7912648)
Accuracy: +1.25%
CALIBRATOR
Range: 400 Hz
John Fluke, Model 5720A
(p/o
MIS-35947);
w/power
amplifier, John Fluke Model
5725A (5725A)
DC CURRENT SHUNT
Range: 0 to 75 A
Guildline, Model 9711 (7912323)
Accuracy:1
Range: 0 to 75 mV dc
Hewlett Packard, Model 3458A
Accuracy:
(p/o MIS-35947 Type 1)
1
HYDRAULIC PRESSURE
Range: 25 to 1000 psig
DHI, RPM3D-A10000 (13534030)
STANDARD
Accuracy: +0.04%
PNEUMATIC PRESSURE
Range: 0 to 25 psig
Druck, Model DPI-145/R (MIS-
STANDARD
Accuracy: +0.6%
45842)
Range: 400 Hz
Khron-Hite, Model 4100AR-8
Accuracy: +1.25%
(7915951-1) w/amplifier,
Khron-Hite, Model 7500RK519
(7915950-1)
Range: 0 to 40 kΩ
Biddle-Gray, Model 71-631
(7910328)
Accuracy: 0Ω to 1500Ω +0.9%
1500Ω to 40,000Ω +0.85%
SYNTHESIZER/
Range: 500 Hz
Hewlett-Packard, Model 3325A
Accuracy: +0.5%
(MIS-35932)
1Combined
accuracy of dc current shunt and digital multimeter: +1.8% to +2.1%.
Common name
Description (part number)
ADAPTER
ADAPTER
(12303696)
ADAPTER
BNC T-type, 2 jacks, 1 plug (MS35173-274C)
CURRENT PROBE
TK11 (supplied with TI)
DC POWER SUPPLY NO. 1
Kepco, Model HB525M20480 (7915935)
Range: 0 to 24 V dc; 5.0 A
DC POWER SUPPLY NO. 2
Dynamic Industries, Model 55314-104054 (MIS-38956)
DC POWER SUPPLY NO. 3
NJE, Model CS36CR30
Range: 0 to 24 V dc; 5.0 A
HIGH PRESSURE TRANSDUCER
TK17 (supplied with TI)
LOW PRESSURE TRANSDUCER
TK22 (supplied with TI)
Compress gas cylinder (7916197)
PNEUMATIC PRESSURE CONTROLLER
(MIS-10324)
PRESSURE REGULATOR
(MIS-10325 Type 1)
VACUUM PUMP
(7912361)
CHANGE 1
5