TB 9-4931-700-50
Table 3. Accessories Required - Continued.
Common Name
Description (Part Number)
Item
(Official Nomenclature)
B8
CABLE (TEST LEAD)
36-in., RG-58( )/U with BNC plug and double banana
plug terminations (7907471)
B9
HOOK-UP WIRE (ELECTRICAL
Shielded pair No. 18 AWG, solid copper (MIS-10312)
POWER CABLE)
B10
ISOLATION BOX (ADAPTER
Double banana jack terminals (SKD4850-3)
BOX)
B11
PROBE
Tektronix, Type 010-0128-00 (010-0128-00)
1Three
required.
SECTION III
PRELIMINARY OPERATIONS
6. Preliminary Instructions
a. The
instructions outlined in this
section are
preparatory to the
calibration
process. Personnel should become familiar with the entire procedure before beginning
the calibration.
b. Items of equipment used in this procedure are referenced within the text by
common name and item identification number as listed in tables 2 and 3. For the
identification of equipment referenced by item numbers prefixed with A, see table 2, and
WARNING
HIGH VOLTAGE is used during the performance of this
calibration. DEATH ON CONTACT may result if personnel
fail to observe safety precautions.
NOTE
Unless otherwise specified, verify the results of each test
and, whenever the test requirement is not met, take
corrective action before continuing with the calibration.
Adjustments required to calibrate the TI are included in this
procedure. Additional maintenance information is contained
in the manufacturer's manual, TM 9-4931-700-14/1, and TM 9-
4931-700-14-2 for this TI.
NOTE
Unless otherwise specified, all controls and control settings
refer to the TI.