TB 9-4935-552-50-2
Table 4. Equipment from Test Station - Continued
Item
Nomenclature
Description
Part number
B11
CA-319
LCSS cable, passive probe
10684119
extender
B12
CA-127
LCSS cable, coaxial
11154531
B13
CA-320
LCSS cable, DMM probe
10684120
extender
SECTION III
PRELIMINARY OPERATIONS: ITS
NOTE
If no ITS is to be calibrated, proceed to section V.
6. Preliminary Instructions
a. Personnel should become familiar with the entire bulletin before beginning the
b. Equipment used in this
calibration is
referenced in the
procedure by
name and item
WARNING
Dangerous voltage is used in the connections of this equipment.
Death or injury on contact may result if personnel fail to
observe proper safety precautions. Care should be exercised in
the connections between equipment.
c. LCSS electro optic assemblies are calibrated inside the shelter.
Suggested
placement of standards are:
Radiometer standard - as required
Shunt and voltmeter - back wall fold down table
d. Ensure that the test station has been operating for at least an hour before beginning
the calibration.
NOTE
Ensure that the LCSS self-test reference 1A7 has been
calibrated or bears a valid DA Label 80 prior to initiating this
procedure.
4