DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR HOLD
BACK TEST FIXTURE
TA 20/14 10682724 AND 1045515
Headquarters, Department of the Army, Washington, DC
21 March 1979
REPORTING OF ERRORS
You can help improve this publication by calling attention to errors and by
recommending
improvements
and
stating
your
reasons
for
the
recommendations. Your letter or DA Form 2028, Recommended Changes to
Publications, should be mailed directly to Commander, U.S. Army Aviation and
Missile Command, ATTN: AMSAM-TMD-EP, Redstone Arsenal, AL 35898-0400.
FAX to DSN 788-2313 (commercial 256-842-2313). A reply will be furnished
directly to you.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification............................
Calibration description .......................................
EQUIPMENT REQUIREMENTS
Equipment required ...........................................
Accessories required ...........................................
PRELIMINARY OPERATIONS
Preliminary instructions ....................................
Equipment Setup................................................
CALIBRATION PROCESS
Force dimension and load check.........................
Final procedure...................................................
__________
*This bulletin supersedes TB 9-4935-558-50-1, dated 16 August 1976.