TB 9-5120-202-24
b. Adjustments. Adjust in accordance with manufacturer's instruction manual.
NOTE
Some torque wrenches/screwdrivers do not have adjustments.
a. Deenergize and disconnect all equipment.
b. Unless otherwise specified by TI manufacturer, set audible (micrometer-type
barrel) indicating torque wrenches at 20 percent of full-scale before storage.
c. Replace TI in its protective case.
NOTE
Calibration of a torque wrench/screwdriver in both clockwise
and counterclockwise directions will be affixed with red tape
overstamped with CW/CCW to identify calibration in both
directions.
d. Annotate and affix DA label/form in accordance with TB 750-25.