TB 9-5210-207-50
IDENTIFICATION AND DESCRIPTION
1. Test Instrument
Identification.
This bulletin provides instructions for the
calibration of Micrometers, Inside (General). See figures 1 through 4. Manufacturers'
manuals were used as the prime date sources in compiling these instructions. The
equipment being calibrated will be referred to as the TI (test instrument) throughout this
bulletin.
a. Model Variations. Variations among models are described in text, tables, and
figures.
b. Time and Technique. The time
required for this
calibration is
approximately 1
hour, using the physical technique.