TB 9-5855-1892-35
c. Remove four screws from LARGE COVER PLATE and remove LARGE COVER
SMALL COVER
ON ALIGN
PLATE
SWITCH
MRT
BAR
X
ON
ALIGN
Figure 3. Large cover plate removed (top view).
e.
Loosely replace LARGE
COVER PLATE
(fig. 2).
f. Perform steps (1) through (6) below:
(1) Ensure TI ON - OFF switch is in OFF position.
(2) Position TI 1C - 4.5C - 10C switch to 4.5C.
(3) Connect ac power cable supplied to J1 (fig. 4).
NOTE
TI should be allowed to stabilize in calibration environment for
a minimum of 1 hour.
5