TB 9-5855-1892-35
c. Install TI LARGE
COVER PLATE
(fig. 2) and
four screws.
d. Using cotton tip applicator soaked with paste removal solvent, clean thermal
conductive paste from TI heater plate surface, MRT target housing, and thermocouple
wires. Remove solvent residue using dry cotton tip applicator.
NOTE
If residue is severe, a cotton tip applicator soaked in contact
cleaner (Krylon No. 1333) may be used, then remove solvent
residue with a dry cotton tip applicator.
e. Stow all cables in straps provided, reinstall shroud and reinstall TI in transit case.
f. Annotate and affix DA label/form in accordance with TB 750-25.
14