TB 9-6515-200-35
Table 1. Calibration Description
SECTION II
EQUIPMENT REQUIREMENTS
4. Equipment Required. Table 2 identifies the specific
ment must meet or exceed the minimum use speci-
equipment to be used in this calibration procedure. This
equipment is issued with Secondary Transfer Calibration
provide a four-to-one ratio between the standard and TI.
Standards Sets AN/GSM-286 and AN/GSM-256, and is to
5. Accessories Required. The accessories listed in table
be used in performing this procedure. Alternate items
3 are issued as indicated in paragraph 4 above and are
may be used by the calibrating activity when the equip-
used in this calibration procedure. When necessary, these
ment listed in table 2 is not available. The items selected
items may be substituted by equivalent items, unless
must be verified to perform satisfactorily prior to use and
specifically prohibited.
must bear evidence of current calibration. The equip-
Table 2. Minimum Specifications of Equipment Required
2