*TB
9-6625-2013-50
SUPERSEDED COPY DATED 13 MARCH 1995
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
DECADE RESISTANCE STANDARD
BIDDLE, MODEL 71-650
Headquarters, Department of the Army, Washington, DC
31 July 2000
Approved for public release; distribution is unlimited
REPORTING OF ERRORS
You can help improve this publication by calling attention to errors and by
recommending
improvements
and
stating
your
reasons
for
the
recommendations. Your letter or DA Form 2028, Recommended Changes to
Publications, should be mailed directly to Commander, U.S. Army Missile
Command, ATTN: AMSAM-TMD-LP, Redstone Arsenal, AL 35898-5000. You
may also contact this office electronically. FAX to DSN 788-2313 (commercial
256-842-2313). A reply will be furnished directly to you.
Paragraph
Page
SECTION
I.
IDENTIFICATION AND DESCRIPTION
Test instrument identification ............................
Forms, records, and reports ................................
Calibration description........................................
II.
EQUIPMENT REQUIREMENTS
Equipment required ............................................
Accessories required............................................
III.
Preliminary instructions .....................................
Equipment setup .................................................
Minimum resistance check..................................
X0.1Ω, and X1Ω accuracy ...................................
X10Ω decade dial accuracy..................................
X100Ω decade dial accuracy................................
X1 kΩ decade dial accuracy ................................
X10 kΩ decade dial accuracy...............................
X100 kΩ decade dial accuracy.............................
Final procedure ...................................................
__________
This bulletin supersedes TB 9-6625-2013-50, dated 13 March 1995.