DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
RF POWER METER
BOONTON ELECTRONICS MODELS 42B,
BOONTON ELECTRONICS,
MODELS 41-4A, 41-4B AND 41-4E
Headquarters, Department of the Army, Washington, DC
23 March 2005
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way
to improve these procedures, please let us know. Mail your letter or DA Form
2028 (Recommended Changes to Publications and Blank Forms) directly to:
Commander, US Army Aviation and Missile Command, AMSAM-MMC-MA-NP,
Redstone Arsenal, AL 35898-5000. A reply will be furnished to you. You may
also provide DA Form 2028 information to AMCOM via e-mail, fax, or the World
Wide Web. Our fax number is DSN 788-6546 or Commercial 256-842-6546. Our
e-mail address is 2028@redstone.army.mil. Instructions for sending an
electronic 2028 may be found at the back of this manual. For the World Wide
Web, use https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification ............................
Forms, records, and reports.................................
Calibration description ........................................
EQUIPMENT REQUIREMENTS
Equipment required .............................................
Accessories required.............................................
CALIBRATION PROCESS
Preliminary instructions......................................
Equipment setup ..................................................
Calibration factor control.....................................
Electrical meter zero ............................................
Main gain ..............................................................
_________
*This bulletin supersedes TB 9-6625-2043-35, dated 7 June 1985, including all changes.