TB 9-6625-2197-50
NOTE
A minimum of two fully charged battery sticks are required for
b. Observe TI
display through VIEWFINDER EYEPIECE
(fig. 2). Press and
release
LAMP TEST BUTTON
S3 (fig. 2)
pushbutton. TI will
indicate 8 888.8 in
upper half of
display and 8 8 separated by the red, green, and yellow indicators in the lower half of
NOTE
Flashing decimal points in display, or no display, may indicate
that the battery stick requires changing.
c.
Press and
release TEST SEQ (SEQUENCE) BUTTON
S1 (fig. 2)
pushbutton. TI
will indicate MODE 1, 2, 3, or C (fig. 3) and the reject (red) indicator (fig. 3) will be lit in the
lower half of display.
d.
Press and
release TEST RPT (REPEAT) BUTTON
S2 (fig. 2)
pushbutton and
ensure that the display indication repeats.
5