TB 9-6625-2250-35
HIGH VOLTAGE is used or exposed during the performance of
personnel fail to observe safety precautions. REDUCE
OUTPUT(S) to minimum after each step within the
performance check where applicable.
a. Connect TI to 115 V ac power source.
b. Press LINE pushbutton to on and allow at least 30 minutes for TI to warm-up and
stabilize.
NOTE
1. [ ] Denotes softkey on display.
2. Refer to C in figure 1 for softkey location.
3. [ ] Softkeys and keys will be referred to as keys in this
procedure.