TB 9-6625-2264-24
5. Accessories Required. The accessories required for this calibration are common
usage accessories issued as indicated in paragraph 4 above, and are not listed in this
calibration procedure. The following peculiar accessories, supplied with the standard, are
also required for this calibration: Bit, tamper proof, 1/8 inch, PN MISC 003-F27503,
manufacturer: Corland; and lens cap/target, APN 13440044.
Table 2. Minimum Specifications of Equipment Required
Manufacturer and model
Common name
Minimum use specifications
(part number)
NIGHT VISION DEVICE
Wavelength range: 305 to 1000 nm
13335470 (13335470)
DETECTOR STANDARD
wavelength peak response: 720 nm +50
Responsitivity: 4.73 x 107
V/W.cm-2.Sr-1 at 820 nm +10%
Dynamic range: 1.0 x 10-12 to 5.0 x 10-8
w/cm2.Sr at 820 nm
109 V/A
Gain (elect):
Range: 0.82 mV to 1.71 V dc
Agilent, Model 3458A (3458A)
Resolution: 0.1 mV
CALIBRATION PROCESS
6. Preliminary Instructions
a. The instructions outlined in paragraphs 6 and 7 are preparatory to the calibration
process. Personnel should become familiar with the entire bulletin before beginning
calibration.
b. Items of equipment used in this procedure are referenced within the text by common
c. Unless otherwise specified, verify the result of each test and, whenever the test
requirement is not met, take corrective action before continuing with the calibration.
Adjustments required to calibrate the TI are included in this procedure. Additional
maintenance information is contained in TM 11-5855-264-14 for this TI.
d. Unless otherwise specified, all controls and control settings refer to the TI.
WARNING
HIGH VOLTAGE is used or exposed during the performance of
this calibration.
DEATH ON CONTACT may result if
personnel fail to observe safety precautions.
REDUCE
OUTPUT(S) to minimum after each step within the
performance check where applicable.
a. Remove protective cover from TI as necessary to gain access to adjustments.
b. Ensure the ON-OFF-POWER CHECK switch is in the OFF position.
c. Connect TI to appropriate power source.