*TB 9-6625-2288-35
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
AN/URM-145D (ME-247D/U)
(MILLIVAC INSTRUMENTS,
MODEL MV-828A)
Headquarters, Department of the Army, Washington, DC
16 October 2003
Distribution Statement A: Approved for public release; distribution is unlimited
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter or DA Form 2028
(Recommended Changes to Publications and Blank Forms) directly to: Commander, U. S.
Army Aviation and Missile Command, ATTN: AMSAM-MMC-MA-NP, Redstone Arsenal, AL
35898-5000. A reply will be furnished to you. You may also provide DA Form 2028
information to AMCOM via e-mail, fax, or the World Wide Web. Our FAX number is: DSN
788-6546 or Commercial 256-842-6546. Our e-mail address is: 2028@redstone.army.mil.
Instructions for sending an electronic 2028 may be found at the back of this manual. For the
World Wide Web, use: https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification...............................
Forms, records, and reports ...................................
Calibration description ..........................................
EQUIPMENT REQUIREMENTS
Equipment required ...............................................
Accessories required ...............................................
Preliminary instructions........................................
Equipment setup ....................................................
Accuracy and linearity ...........................................
Frequency response ................................................
Power supply...........................................................
Final procedure.......................................................
_________
*This bulletin supersedes TB 9-6625-2288-35, dated 16 November 1992.