TB 9-6625-2296-35
Test instrument
Test instrument
Calibrator
range settings
output settings
Min
Max
20 mA
18
mA
16.99
mA
19.01
mA
200
mA
180
mA
169.9
mA
190.1
mA
2
A
1.8
A
1.699
A
1.901
A
20
A1
5
A
3.99
A
6.01
A
1Set
calibrator to STANDBY and disconnect from TI. Connect current shunt (supplied with TI)
to TI DMM V/Ω and COM. Connect calibrator amplifier OUTPUT HI and LO to current
shunt inputs observing polarity. After verification set calibrator to STANDBY.
(10) Connect calibrator OUTPUT HI and LO to DMM V/Ω and COM.
(11) Press Func (F1) key, use DATA SCROLL controls to select Ohm, and press
DATA ENTRY ENTER key.
(12) Press RANGE (F2) key, use DATA SCROLL controls to select TI range
settings, press DATA ENTRY ENTER key, and set calibrator output for settings listed in
table 9. At
each setting, use calibrator output
adjustment controls to
set calibrator control
display Reading equal to TI indication. Calibrator control display Error indications will
Calibrator
Test instrument
Output
Error indications
range settings
settings
(%)
Ω
Ω1
200
100
10.1
kΩ
kΩ
2
1
10.1
kΩ
kΩ
20
10
10.1
kΩ
kΩ2
200
100
10.1
MΩ
MΩ
2
1
10.1
MΩ
MΩ
20
10
10.1
Set calibrator 2 wire Comp to ON.
1
Set calibrator 2 wire Comp to OFF.
2
b. Adjustments. No further adjustments can be made.
13. Generator Output
Level
a. Performance Check
(1) Press key sequence listed in (a) through (f) below:
Meters Menu
(a) MODE MTRS ..........................
Auxiliary Function Menu
(b) AUX (F6) ..................................
Recall
(c) MEMORY RCL .......................
(d) FIELD SELECT ⇑ ..................
Highlight 10. Factory Defaults
Factory Defaults recall
(e) DATA ENTRY ENTER ..........