TB 9-6625-2333-35
Figure 5. Frequency response -
equipment setup.
(2) Press TI keys and enter values using DATA keys as listed in (a) through
(e) below:
(a) INSTRUMENT STATE PRESET.
(b) FREQUENCY then [CENTER FREQ] to 300 MHz.
(c) SPAN then [SPAN] to 1 MHz.
(d) AMPLITUDE then [LOG dB/DIV] to 2 dB/DIV.
(e) [MORE 1 OF 3] then [COUPLING AC DC] to select DC.
(4) Press TI MARKER PEAK SEARCH key.
(5) Set measuring receiver to measure RF power in dBm at 300 MHz.
(6) Adjust signal generator level output for a TI MKR amplitude indication
between -9.95 and -10.05 dBm.
(7) Record measuring receiver indication.
(8) Set signal generator frequency to 13.2 GHz.
(9) Set measuring receiver to measure RF power in dBm at signal generator
frequency.
(10) Press TI FREQUENCY key then [CENTER FREQ] key and enter 13.2 GHz
using DATA keys.
(11) Press MARKER PEAK SEARCH key.
(12) Adjust signal generator level output for a TI MKR amplitude indication
between -9.95 and -10.05 dBm.
(13) Measuring receiver indication will be within 2.9 dB of indication recorded in
(7) above.
30