TB 9-6625-2340-35
(33) TI MKR ∆ indication should be 10 1.0 kHz.
(34) Press TI keys as listed in (a) through (i) below:
(a)
MARKER OFF.
(b)
(c)
(d)
RES BW, 3, kHz.
REFERENCE LEVEL, 10, -dBm.
(e)
(f)
SCALE LIN.
(g)
SHIFT.
AUTOA.
(h)
(i)
REFERENCE LEVEL.
(35) Adjust DATA knob to position trace at (or just below) reference level (top)
graticule line.
(36) Press TI keys as listed in (a) through (d) below:
(a)
MARKER NORMAL.
(b)
MARKER PEAK SEARCH.
MARKER→CF.
(c)
MARKER ∆.
(d)
(37) Adjust TI DATA knob to place marker down the positive going side of the
displayed signal to the -3 dB point.
(38) Adjust A4A9R66 (fig. 8) for a MKR ∆ indication of 1.5 kHz while maintaining
marker at the -3 dB point using TI DATA knob (R).
(39) Press TI MARKER ∆ key.
(40) Adjust TI DATA knob to set marker to the -3 dB point on the negative going
side of the displayed signal. There are now two markers; one on each side of the signal at
the -3 dB points.
(41) TI MKR ∆ indication should be 3.0 0.30 kHz.
(42) Press TI 2-22 GHz key.
(43) Replace TI top cover.
a. Performance Check
(1) Press TI 2-22 GHz key.
23