TB 9-6625-2341-24
(1) TI should be allow at least 20 minutes for warm-up.
(2) Complete reset as listed in (a) through (e) below:
(a) Select reset scope by pressing pushbutton sequence (i) through (x) below:
(i)
USER OPTIONS.
(ii) (F1) MORE OPTION.
(iii) Toggle
to display/highlight RESET MENU.
or
(iv) (F5) SELECT ITEM.
(v) Toggle
to display/highlight RESET SCOPEMETER.
or
(vi) (F5) SELECT ITEM.
(vii) (If all ScopeMeter settings have been set to original setting then (F1)
CLOSE), which will display/highlight RESET SCOPEMETER.
(viii)Toggle
to display/highlight RESET SCOPE.
or
(ix) (F5) SELECT ITEM.
(x) (For original settings, SCOPE mode needs to be selected. Change to
SCOPE mode now? (F1) YES then (F1) CLOSE) or (if all ScopeMeter settings have been
set to original setting then (F1) CLOSE), which will display/highlight RESET SCOPE.
(b) Select reset meter by pressing pushbuttons sequence (i) through (iii) below:
or to display/highlight RESET METER.
(i) Toggle
(ii) (F5) SELECT ITEM.
(iii) (For original settings, METER mode needs to be selected. Change to
SCOPE mode now? (F1) YES then (F1) CLOSE) or (if all Meter settings have been set to
original setting then (F1) CLOSE), which will display/highlight RESET METER.
(c) Select reset ohms by pressing pushbuttons sequence (i) through (iii) below:
(i)
Toggle
to display/highlight RESET OHM.
or
(ii) (F5) SELECT ITEM.
(iii) (For original settings, ohm needs to be selected. Change to ohm mode
now press (F1) YES then (F1) CLOSE) or (if all ohm settings have been set to original
setting then press (F1) CLOSE), which will display/highlight RESET OHM.
(d) Select reset diode by pressing pushbuttons sequence (i) through (iii) below:
(i)
Toggle
to display/highlight RESET DIODE.
or
(ii) (F5) SELECT ITEM.
(iii) (For original settings, DIODE needs to be selected. Change to DIODE
mode now press (F1) YES then (F1) CLOSE) or (if all ohm settings have been set to
original setting then press (F1) CLOSE), which will display/highlight RESET DIODE.
(e) Select reset Ext.mV by pressing pushbuttons sequence (i) through (vi) below:
(i)
Toggle
to display/highlight EXTERNAL mV.
or
29