TB 9-6625-2341-35
(3) Press pushbutton sequence as listed in (a) through (d) below:
(a) "Input B" to off by pressing (1) through (7) below:
(1) INPUT B to display/highlight DISPLAY INPUT B.
(2) (F1) MORE INPUT B.
(3) Toggle ▲ or ▼ to display/highlight INPUT B.
(4)
(F5) SELECT ITEM.
(5)
Toggle ▲ or ▼ to display/highlight off.
(6) (F5) SELECT ITEM.
(7) (F1) CLOSE.
(b) "Input A" probe to 1:1 by pressing (1) through (9) below:
(1)
INPUT A to display/highlight DISPLAY INPUT A.
(2)
(F1) MORE INPUT A.
(3)
Toggle ▲ or ▼ to display/highlight PROBE A MENU.
(4)
(F5) SELECT ITEM which should display/highlight PROBE on INPUT A.
(5)
(F5) SELECT ITEM which should display/highlight (1:1, 10:1, 100:1, 1000:1 , etc.).
(6)
Toggle ▲ or ▼ to display/highlight 1:1.
(7)
(F5) SELECT ITEM which should display/highlight PROBE on INPUT A.
(F1) CLOSE which should display/highlight INPUT A.
(8)
(9)
(F1) CLOSE which should display/highlight DISPLAY
INPUT A.
(c) Auto to manual range by toggling (mV RANGE V) on left side, under
INPUT A pushbutton to display/highlight A 5mVDC 1:1.
(d) Auto to manual trigger by pressing (1) through (4) below:
(1)
TRIGGER.
(2)
(F5) ADJUST LEVEL which should display/highlight AUTO LEVEL.
(3)
(F4) MANUAL LEVEL.
(4)
Toggle ▲ or ▼ to change trigger level starting with (LEVEL 0.000 V) display.
(5)
(6)
Perform steps as listed in (a) through (d) below for each row in table 3.
(a) Under INPUT A pushbutton on left side, toggle (mV RANGE V) to
display TI Range settings.
6