TB 9-6625-2351-35
Paragraph
Page
marker accuracy ................................................
Frequency span accuracy.....................................
Frequency response .............................................
Residual responses ...............................................
Power supply ........................................................
Final procedure ....................................................
IDENTIFICATION AND DESCRIPTION
1. Test Instrument Identification.
This bulletin provides instructions for the
calibration of Spectrum Analyzer Hewlett-Packard, Model 8562A. The manufacturer's
manual was used as the prime data source in compiling these instructions. The equipment
being calibrated will be referred to as the TI (test instrument) throughout this bulletin.
a. Model Variations. Due to the variations among models, the only internal
adjustments included in this procedure are for the calibrator and power supply. Additional
adjustments are contained in the manufacturer's manual.
b. Time and Technique. The time required for this calibration is approximately 6
hours, using the dc and low frequency and microwave techniques.
2. Forms,
Records, and
Reports
a. Forms, records, and
reports required for calibration personnel at all
levels are
prescribed by TB 750-25.
b. Adjustments to be reported are designated (R) at the end of the sentence in which
they appear. When adjustments are in tables the (R) follows the designated adjustment.
Report only those adjustments made and designated with (R).
3. Calibration
Description. TI
parameters and
performance specifications which
pertain to this calibration are listed in table 1.