TB 9-6670-254-50
Table 7. Minimum Specifications of Equipment Required - Continued.
Common name
Minimum use
Manufacturer and model
Item
(official nomenclature)
specifications
(part number)
(7907068)
A10
WEIGHT SET
Range: 1 mg to 100 g
(1 each 1, 2, 3,
5, 10, 20, 30,
50, 100 g)
(1 each 1, 2, 3,
5, 10, 20, 30,
50, 100, 200,
300, 500 mg)
Accuracy: NBS Class S
(7907379)
A11
WEIGHT SET
Range: 100 g to 1 kg
(1 each 100 g,
500 g, 1 kg)
(2 each 200 g)
Accuracy: NBS Class S
1This
balance should not be used to calibrate weights which have a tolerance less than 0.3 mg.
Common name
Description
Item
(official nomenclature)
(part number)
B1
LEAD1
32-in., single banana plug to test hook (red)
(7915941-1)
1Two
required.
6. Preliminary
Instructions
a. The
instructions outlined in
paragraphs 6 and
7 are preparatory to the
calibration
process. Personnel should become familiar with the entire bulletin before beginning the
.
b. Items of equipment used in this procedure are referenced within the text by common
name and item identification number as listed in tables 7 and 8. For the identification of
equipment referenced by item numbers prefixed with A, see table 7, and for prefix B, see
table
WARNING
HIGH VOLTAGE is used or exposed during the performance of
DEATH ON CONTACT may result if
personnel fail to observe safety precautions.