TM 9-6625-2096-34P
Section I. INTRODUCTION
1. Scope. This manual lists spares and repair parts that
(2) Item Number.
The number used to
are required for maintenance of Calibrator, Electric,
identify each item called out in the list.
Hewlett-Packard Model 11683A.
It authorizes the
requisitioning and issue of spares and repair parts as
b. Source,
Maintenance,
and
Recoverability
indicated by the source and maintenance codes.
(SMR) Codes.
2. General. This repair parts and special tools list
(1) Source Code. Source codes indicate the
(RPSTL) is divided into the following sections:
manner of acquiring support items for maintenance,
repair, or overhaul of end items. Source codes are
entered in the first and second positions of the uniform
and repair parts authorized for use in the performance of
SMR code format as follows:
maintenance. The list also includes parts which must be
removed for replacement of the authorized parts. Parts
Code
Definition
are listed in alphabetical sequence within each figure
number.
PA -
Item procured and stocked for anticipated or
known usage.
b. Section III. Special Tools List. Not applicable.
(2) Maintenance Code. Maintenance codes
are assigned to indicate the levels of maintenance
Number Index. A list, in National item identification
authorized to USE and REPAIR support items. The
number (NIIN) sequence, of all National stock numbers
maintenance codes are entered in the third and fourth
(NSN's) appearing in the listings, followed by a list in
positions of the uniform SMR code format as follows:
alphanumeric sequence of all part numbers appearing in
the listings.
NSN's and part numbers are cross-
(a) The maintenance code entered in
referenced to the figure and item number appearance.
the third position will indicate the lowest maintenance
level authorized to remove, replace, and use the support
3. Explanation of Columns
item. This position will contain the following code:
a. Illustration. This column is divided as follows:
Code
Application/Explanation
(1) Figure Number.
Indicates the figure
F-
Support item is removed, replaced, and
number of the item shown.
used at the direct support level.
(b) The maintenance code entered in
the fourth position indicates whether the item is to be
repaired and identifies the lowest maintenance level with
the
1