TB 11-6625 -3263-25
Items Potentially Replaceable
Designator
LIN
NSN
Condition Code
AN/URM -167
V89581
I3, P3, E98
AN/URM -182
V89641
T3, T5, I3, E97
AN/URM -182A
V89641
T3, T5, I3, E97
ME-69
P2, I1, E98
TS-2609/U
6625-00-933-8786
T3, T5
TS-2609A
T3, T5
TS-3754/U
T3, T5
Condition Codes
Code
Condition
E97
The AN/URM -182 and AN/URM -182A are very small, light, and rugged
instruments used primarily with mobile, airborne and pack-carried
transmitters and transceivers. The AN/PRM -34 replaced the AN/URM -182,
and AN/URM-182A in certain cases (see cc: E1).
E98
The upper frequency limit of the TEMOD item is 1000 MHz with the
elements supplied. Other elements can be ordered if there is a need
above 1,000 MHz.
I1
No type designator assigned. Commercial make and model number
appears in Type Designator column.
The salient technical characteristics of the potentially replaceable TMDE
I3
that exceed those of the TEMOD item are listed in the appropriate code.
These technical differences listed are the major differences in performance
between the two items; other technical differences may exist which could
prevent replaceability by the TEMOD item. Before a user adopts the
TEMOD item as a replacement, a detailed spec comparison should be
performed.
I12
The AN/USM-298 has two plug-in elements included with it, the ranges
that are covered by these elements are covered by the new item. Although
the characteristics of the AN/USM -298 state that it covers from 1000-2300
MHz, the plug-in elements supplied only cover up to 1000 MHz.
Item does not have a LIN; however, item is capable of being replaced by
P2
TEMOD item and will eventually be removed from the field by attrition. Unit
should take action to update authorization documents to include TEMOD
item. (i.e., Objective is to get MTOE's/TDA's updated.) Following formal
authorization and requisition, the TEMOD item will be issued.
P3
Item removed from the field in certain applications; see applicable "E"
code/s.
Configuration of TEMOD item may not be compatible with configuration of
T3
existing TMDE and end system. (i.e., This is a form/fit/size issue, not one
of performance.)
TEMOD item measurement capabilities greatly exceed those of target
T5
replacement item.
4-32
