TB 11-6625 -3263-25
Condition Codes Continued
Code
Condition
P2
Item does not have a LIN; however, item is capable of being replaced by
TEMOD item and will eventually be removed from the field by attrition. Unit
should take action to update authorization documents to include TEMOD
item. (i.e., Objective is to get MTOE's/TDA's updated.) Following formal
authorization and requisition, the TEMOD item will be issued.
Item removed from the field in certain applications; see applicable "E"
P3
code/s.
Although these items do not have a LIN, they will be included on the BOIP
P4
and will be removed from the field.
Plug in removed only when mainframe is removed from the field.
P5
Items capabilities exceed those of TEMOD item; however, depending
T1
upon measurement requirement, TEMOD item may be substituted. (i.e.,
Range of performance greater than equivalent function in TEMOD item.)
Configuration of TEMOD item may not be compatible with configuration of
T3
existing TMDE and end system. (i.e., This is a form/fit/size issue, not one
of performance.)
The AM-6785 is a Tektronix Model 7A26 plug-in used in the series 7000
T6
of the AM -6785 and are using a non-storage mainframe should use the
AN/USM-488. Units that require 200 MHz bandwidth and are using a non-
The AM-6880 is a Tektronix Model 7A18, 7A18A Dual Trace Amplifier
T7
plug-in used in the series 7000 mainframes. The 7A18, 7A18A has a
bandwidth of 75 MHz while the TEMOD has a bandwidth of 100 MHz.
4-59