TB 11-6625 -3263-25
Condition Codes Replacement Lists Continued
Code
Condition
M1
Item is a plug -in module technically replacea ble by TEMOD item but only
when used with the mainframe/end item that is being replaced by TEMOD
item.
Item is a plug -in module that is functional only when used with a
M2
mainframe.
The IP -1216 is a mainframe that requires plug -ins to operate. The
M3
AN/USM-620 will replace the IP -1216 only when the IP -1216 is used with
the PL-1388 plug-in and either or both of the following plug -ins: PL-1387,
PL-1399.
M4
The PL-1391 is a plug-in for an oscilloscope mainframe, the Tektronix
7603. The AN/USM-620 will replace the PL-1391 plug -in.
Replace plug-in and mainframe with SG-1206.
M5
Item is a plug -in that can be used with several mainframes. Do not
M6
replace plug-in alone with SG -1206. Replace plug-in and mainframe with
SG-1206.
Item is a mainframe. Do not replace mainframe aloe with SG -1206.
M7
Replace mainframe and plug-ins (if plug-ins are listed on SG-1206
replacement listed) with SG -1206.
Item will not be removed from the field at this time; however, item is
P1
replaceable by TEMOD item. This item will be LCC B (if type classified)
and is technically suitable for retention against authorizations for the
standard TEMOD LCC A item. (i.e., Objective is to fill shortages with
suitable item pending availability of LCC A item.)
Item does not have a LIN; however, item is capable of being replaced by
P2
TEMOD item and will eventually be removed from the field by attrition.
Unit should take action to update authorization documents to include
TEMOD item. (i.e., Objective is to get MTOE's/TDA's updated.) Following
formal authorization and requisition, the TEMOD item will be issued.
P3
Item removed from the field in certain applications; see applicable "E"
code/s.
P4
Although these items do not have a LIN, they will be included on the BOIP
and will be removed from the field.
Plug in removed only when mainframe is removed from the field.
P5
Item replaced by TEMOD item and will be removed from the field by
P6
attrition only.
T1
Items capabilities exceed those of TEMOD item, however, depending
upon measurement requirement. (i.e., Some functions in replaced item
not found in TEMOD item.)
T2
TEMOD item is technically similar and may be substituted depending
upon measurement requirement. (i.e., Some functions in replaced item
not found in TEMOD item.)
Configuration of TEMOD item may not be compatible with configuration of
T3
existing TMDE and end system. (i.e., This is a form/fit/size issue not one
of performance.)
TEMOD item cost is substantially greater than target replacement item.
T4
Replacement determined by economics.
T5
TEMOD item measurement capabilities greatly exceed those of target
replacement item.
4-210
