TB 9-4931-363-50
Table 3. Accessories Required
Item
Part No.
Description
Adapter
7907528
Banana jack to pin plug (black)
Adapter
7907517
Banana jack to pin plug (red)
Lead, electrical
7907498
24-inch, No. 18, with single
banana-plug terminations (red)
Lead, electrical
7907497
24-inch, No. 18, with single
banana-plug terminations (black)
SECTION III
PRELIMINARY OPERATIONS
NOTE
Personnel should familiarize themselves with this entire
bulletin prior to performing calibration.
WARNING
The digital multimeter contains high-voltage converters.
Removal of high voltage levels is not assured until the
multimeter is disconnected from TB1 and the high-voltage
points are grounded. Dangerous voltages and currents are
present, in the voltage calibration equipment. Use extreme
caution when working with this equipment.
NOTE
When the unit under test is not within tolerance, perform the
specified adjustment and continue the performance check.
When the unit under test cannot be brought within tolerance,
the deficiency must be corrected before continuing with the
procedure.
and allow sufficient time for equipment to warm up and stabilize.
SECTION IV
WARNING
Use insulated calibration tool. High voltage may be present at
adjustment points.
4
