Final Procedure - TB-9-6625-2197-500030

TB-9-6625-2197-50 Tronsponder Set Test Set AN/APM-424(V)2 Manual
Page Navigation
30

TB 9-6625-2197-50

(11) Connect P1 cable (8) (fig. 4) to connector J12 (15) (fig. 4).

(12) Connect P1 cable (10) (fig. 4) to connector (11) (fig. 4).

(13) Gently join lower housing and TI.

(14) Install four screws (7) (fig. 4).

(15) Turn TI upside down and install retaining ring (6), cover (4), and nut (5) (fig. 4).

(16) Place antenna near TI and connect cables (2) and (3) (fig. 4).

(17) Gently join antenna and TI.

(18) Install six screws (1) (fig. 4).

b. Perform an operational check by repeating 7 (a) through (e) above.

c. Annotate and affix DA label/form in accordance with TB 750-25.