TB 9-6625-2217-35
(5) Set signal generator amplitude to 7 mV.
(6) If TI GATE LED is flashing; repeat (3) above through (6).
12. Trigger Levels
a. Performance Check
(1) Cycle POWER ON/OFF pushbutton from OFF to ON.
(2) Connect multimeter INPUT HI to TI rear panel A TRIGGER LEVEL
OUTPUTS and INPUT LO to TI chassis ground.
(3) Press TI keys INPUT A TRIG LEVEL, 5, INPUT A TRIG LEVEL.
(4) Multimeter will indicate between +4.94 and +5.06 V dc.
(5) Press TI keys INPUT A
TRIG LEVEL, 5, SHIFT, +/-, INPUT A TRIG
LEVEL.
(6) Multimeter will indicate between -5.06 and -4.94 V dc.
(7) Press TI keys INPUT A TRIG LEVEL, 0, INPUT A TRIG LEVEL
(8) Multimeter will indicate between -0.010 and +0.010 V dc.
(9) Connect multimeter INPUT HI to TI rear panel B TRIGGER LEVEL
OUTPUTS.
(10) Press TI keys INPUT B TRIG LEVEL, 5, INPUT B TRIG LEVEL.
(11) Multimeter will indicate between +4.94 and +5.06 V dc.
(12) Press TI keys INPUT B TRIG LEVEL, 5, SHIFT, +/-, INPUT B TRIG
LEVEL.
(13) Multimeter will indicate between -5.06 and -4.94 V dc.
(14) Press TI keys INPUT B TRIG LEVEL, 0, INPUT B TRIG LEVEL.
(15) Multimeter will indicate between -0.010 and +0.010 V dc.
(16) Disconnect multimeter from TI.
b. Adjustments. No adjustments can be made.
10
