*TB 9-6695-300-50
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
RADAR GUN TUNING FORKS
(GENERAL)
Headquarters, Department of the Army, Washington, DC
7 May 2004
Distribution Statement A: Approved for public release, distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way
to improve these procedures, please let us know. Mail your letter or DA Form
2028 (Recommended Changes to Publications and Blank Forms) directly to:
Commander, US Army Aviation and Missile Command, AMSAM-MMC-MA-NP,
Redstone Arsenal, AL 35898-5000. A reply will be furnished to you. You may
also provide DA Form 2028 information to AMCOM via e-mail, fax, or the World
Wide Web. Our fax number is DSN 788-6546 or Commercial 256-842-6546. Our
e-mail address is 2028@redstone.army.mil.
Instructions for sending an
electronic 2028 may be found at the back of this manual. For the World Wide
Web, use https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification ..............................
Forms, records, and reports...................................
Calibration description ..........................................
EQUIPMENT REQUIREMENTS
Equipment required...............................................
Accessories required...............................................
CALIBRATION PROCESS
Preliminary instructions .......................................
Equipment setup ....................................................
Frequency accuracy................................................
Final procedure ......................................................
__________
*This bulletin supersedes TB 9-6695-300-35, dated 20 June 2000.
