TM 9-4935-294-15/2
1-PC board assy, dispersion, X-band-- 7923219--2 PC
32, 1/2 in. Ig, UNC2A-MS-35206-230
board assy, dispersion, C-band-- 7923219--3
10-Connector, plug (Type ME-43-P-4 Burndy)-7923073
2-Screw, machine, pan hd, no. 4-40, 5/16 in. Ig,
11-Nut, self-locking, no. 4-40, UNC-2B-MS20365-440
UNC-2A-MS35206-214
12-Screw, machine, pan hd, no. 4-40, 1/2 in. Ig,
3--Washer, lock, split, helical, no. 4--MS35337-40
UNC-2A-MS-35206-217
4-Washer, flat, round, steel--MS-27183-
13-Contact, connector, male (Type no. 20, RM18W-17
5-Clamp,loop-plastic, wire support-MS25281-5
Burndy) -7923076
6-Nut, plain, hex, machine screw, no. 6-32, UNC2B-
14-Screw, machine, pan hd, no. 6-32, 1/4 in. ig,
UNC-2A--MS-35206-226 1
MS3564962
15-Washer, lock, split, helical, no. 6-MS35337-41
7-Washer, lock, split, helical, no. 6-MS35338 41
16-Lug, solder-7923256-2
8-Washer, flat, round, steel-MS-27183-5
17-Stop, switch-7923062
9-Screw,
machine,
pan hd,
no.
6-
18-Bracket, connector-7923040-1
Figure 4-23. Connector Bracket Assemblies, C- and X-Band Rf Head, Exploded View.
g. Disassembly and Assembly,
of C- and X-Band
to exploded view, figure 4-20, and appropriate wiring
Connector Bracket Assemblies.
diagram, figure 4-21 or 4-22, and reverse the order of
disassembly.
1
Note .Apply sealing
compound10528558
or 1
In systems with serial nos. 107, 108, 110 and
106286557, as applicable and required, to all screws
up, this screw is replaced with an insulated terminal
not secured with locking devices (refer to paragraph 4,
(refer to 15, fig. 4-12).
28).
Change 1 4-36
