TB 9-6625-2080-24
Paragraph
Page
CALIBRATION PROCESS FOR VECTRON
LABORATORIES, MODEL 207-6192
Preliminary instructions......................................
Equipment setup ..................................................
Frequency stability ..............................................
Final procedure ....................................................
CALIBRATION PROCESS FOR EFRATOM,
MODEL M-100
Preliminary instructions......................................
Equipment setup ..................................................
Frequency stability ..............................................
Final procedure ....................................................
IDENTIFICATION AND DESCRIPTION
1. Test Instrument Identification.
This bulletin provides instructions for the
Laboratories, Models 244-4799 and 207-6192, and Rubidium Oscillator, Efratom, Model M-
100. The manufacturers' manuals were used as the prime data sources in compiling these
instructions. The equipment being calibrated will be referred to as the TI (test instrument)
throughout this bulletin.
a. Model Variations. Variations among models are described in text.
b. Time and Technique. The time required for this calibration is approximately 1
hour, using the dc and low frequency technique.
2. Forms, Records, and Reports
a. Forms, records, and reports required for calibration personnel at all levels are
prescribed by TB 750-25.
b. Adjustments to be reported are designated (R) at the end of the sentence in which
they appear. When adjustments are in tables, the (R) follows the designated adjustment.
Report only those adjustments made and designated with (R).
3. Calibration Description. TI parameters and performance specifications which
pertain to this calibration are in table 1.