*TB 9-6625-2084-35
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
(TEKTRONIX, TYPE 7623A)
AND TEKTRONIX, TYPES 7623, 7613/R7613,
R7623A, 7633/R7633, AND 7633 OPT 5
Headquarters, Department of the Army, Washington, DC
17 February 2004
Distribution Statement A: Approved for public release, distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter or DA Form 2028
(Recommended Changes to Publications and Blank Forms) directly to: Commander,
US Army Aviation and Missile Command, AMSAM-MMC-MA-NP, Redstone Arsenal,
AL 35898-5000. A reply will be furnished to you. You may also provide DA Form
2028 information to AMCOM via e-mail, fax, or the World Wide Web. Our fax
number is DSN 788-6546 or Commercial 256-842-6546. Our e-mail address is
2028@redstone.army.mil. Instructions for sending an electronic 2028 may be found
at the back of this manual.
For the World Wide Web, use
https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification ............................
Forms, records, and reports.................................
Calibration description ........................................
EQUIPMENT REQUIREMENTS
Equipment required ............................................
Accessories required.............................................
Preliminary instructions......................................
Equipment setup ..................................................
Vertical gain and linearity...................................
High-frequency compensation .............................
Horizontal gain and linearity ..............................
High-frequency timing .........................................
Risetime ................................................................
Calibrator output..................................................
Power supply ........................................................
Final procedure.....................................................
_________
*This bulletin supersedes TB 9-6625-2084-35, dated 10 April 1989, including all changes.