TB 9-6625-2313-50
Table 2. Minimum Specifications of
Equipment Required
Manufacturer and model
Common name
Minimum use specifications
(part number)
Range: 0.1 pF to 2000 f
CAPACITANCE MEASURING
General Radio, Model 1615A
SYSTEM
Accuracy:
(1615A)
1
2
Range: 5.0 nF to 1.0 F
CAPACITANCE STANDARD NO. 1
Arco Electronic, Model SS-32
Accuracy:
(7907233)
2
CAPACITANCE STANDARD NO. 2
Range: 100 pF to 1.0 nF
General Radio, Model 1422D
Accuracy:2
(1422D)
Range: 100 H
INDUCTOR STANDARD NO. 1
General Radio, Model 1482B
Accuracy: 0.025% (0.16%)
(1482B)
INDUCTOR STANDARD NO. 2
Range: 1 mH
General Radio, Model 1482E
Accuracy: 0.025% (0.05%)
(1482E)
INDUCTOR STANDARD NO. 3
Range: 100 mH
General Radio, Model 1482L
Accuracy: 0.025% (0.04%)
(1482L)
INDUCTOR STANDARD NO. 4
Range: 200 mH
General Radio, Model 1482C
Accuracy: 0.025% (0.09%)
(1482C)
INDUCTOR STANDARD NO. 5
Range: 1 H
General Radio, Model 1482P
Accuracy: 0.025% (0.08%)
(1482P)
INDUCTOR STANDARD NO. 6
Range: 10 H
General Radio, Model 1482T
Accuracy: 0.025%
(1482T)
Range: 100 Hz and 1 kHz
Hewlett-Packard, Model 3458A
(3458A)
1Used
6. Preliminary
Instructions
a. The
instructions outlined in
paragraphs 6 and
7 are preparatory to the
calibration
process. Personnel should become familiar with the entire bulletin before beginning the
b. Items of equipment used in this procedure are referenced within the text by common
c. Unless otherwise specified, verify the result of each test and, whenever the test
requirement is not met, take corrective action before continuing with the calibration.
Adjustments required to calibrate the TI are included in this procedure. Additional
maintenance information is contained in the manufacturer's manual for this TI.
d. Unless otherwise specified, all controls and control settings refer to the TI.