TB 11-6625 -3263-25
Condition Codes
Code
Condition
E13
The TS-2395 measures envelope delay from 300 Hz to 110 kHz for 50, 75,
135 and 600 ohm circuits. The TEMOD item measures envelope delay
from 200 Hz to 100 kHz for 135, 600 and 900 ohm circuits.
The TS-2669 measures envelope delay from 100 Hz to 550 kHz for 75,
E14
120, 135, 150, 600 and 900 ohm circuits. The TEMOD item measures
envelope delay from 200 Hz to 110 kHz for 135, 600 and 900 ohm circuits.
The TEMOD item measures envelope delay from 200 Hz to 100 kHz for
E15
135, 600 and 900 ohm circuits in addition to the following: level, noise,
impulse noise, non -linear distortion, jitter, hits, par, s/n and return loss.
The ME-490 measures jitter and hits.
E16
E17
The 9041 measures level and return loss. It also contains decade buildout
capacitors.
No type designator assigned. Commercial make and model number
I1
appears in Type Designator column.
Item will not be removed from the field at this time, however, item is
P1
replaceable by TEMOD item. This item will be LCC B (if type classified)
and is technically suitable for retention against authorizations for the
standard TEMOD LCC A item. (i.e., Objective is to fill shortages with
suitable item pending availability of LCC A item.)
P3
Item removed from the field in certain applications; see applicable "E"
code/s.
Although these items do not have a LIN, they will be included on the BOIP
P4
and will be removed from the field.
TEMOD item measurement capabilities greatly exceed those of target
T5
replacement item.
4-80
