*TB 9-4910-556-35
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
STE-M1/FVS TEST SET
Headquarters, Department of the Army, Washington, DC
5 June 2003
Approved for public release; distribution is unlimited
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter, DA Form 2028
(Recommended Changes to Publications and Blank Forms), or DA Form 2028-2
directly to:
Commander, U.S. Army Aviation and Missile Command, ATTN:
AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5000. A reply will be furnished
to you. You may also provide DA Form 2028 information to AMCOM via e-mail, fax,
or the World Wide Web. Our fax number is DSN 788-6546 or Commercial 256-842-
6546. Our e-mail address is: 2028@redstone.army.mil. Instructions for sending an
electronic 2028 may be found at the back of this manual. For the World Wide Web,
use https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification ...........................
Forms, records, and reports ...............................
Calibration description ......................................
EQUIPMENT REQUIREMENTS
Equipment required ..........................................
Accessories required ..........................................
CALIBRATION PROCESS FOR VEHICLE TEST METER (VTM)
Preliminary instructions....................................
Equipment setup ...............................................
Dc voltage..........................................................
Resistance .........................................................
Dc current .........................................................
Ac current .........................................................
Ac voltage and frequency ...................................
Pressure............................................................
Vacuum .............................................................
RPM..................................................................
______________________
*This technical bulletin supersedes TB 9-4910-556-35, dated 22 January 1996, including all changes.
CHANGE 1
