*TB 9-5120-212-35
CHANGE 1
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
TORQUE WRENCHES, POWER-DYNE, MODELS PD 1220,
PD 1220B, PD 1201, AND PD 2501; CONSOLIDATED DEVICES,
MODELS DPT-1200, DPT-1200R, DPT-2500, AND DPT-2500R;
AND TORQUE APPLICATOR, POWERDYNE, MODEL PD12003
Headquarters, Department of the Army, Washington, DC
9 June 2006
Distribution Statement A: Approved for public release; distribution is unlimited.
TB 9-5120-212-35, 16 July 2003, is changed as follows:
1. Remove old pages and insert new pages as indicated below. New or changed material is
indicated by a vertical bar in the margin of the page.
Remove Pages
Insert Pages
3 through 6
2. File this change sheet in front of the publication for reference purposes.
By Order of the Secretary of the Army:
PETER J. SCHOOMAKER
General, United States Army
Official
Chief of Staff
JOYCE E. MORROW
Administrative Assistant to the
Secretary of the Army
0610101
Distribution:
To be distributed in accordance with IDN 343740, requirements for calibration procedure
TB 9-5120-212-35.
