*TB 9-5210-208-35
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
VERNIER CALIPERS, TYPE 1
CLASSES 1, 2, AND 3
DIGITAL AND DIAL CALIPERS
Headquarters, Department of the Army, Washington, DC
23 July 2003
Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter or DA Form 2028
(Recommended Changes to Publications and Blank Forms)directly to: Commander,
U.S. Army Aviation and Missile Command, ATTN: AMSAM-MMC-MA-NP, Redstone
Arsenal, AL 35898-5000. A reply will be furnished to you. You may also provide DA
Form 2028 information to AMCOM via e mail, fax, or the World Wide Web. Our fax
-
number is DSN 788-6546 or Commercial 256-842-6546. Our e-mail address is:
2028@redstone.army.mil. Instructions for sending an electronic 2028 may be found at
the
back
of
this
manual.
For
the
World
Wide
Web,
use
https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification ............................
Forms, records, and reports ...............................
Calibration description .......................................
EQUIPMENT REQUIREMENTS
Equipment required ...........................................
Accessories required ...........................................
CALIBRATION PROCESS
Preliminary instructions ....................................
Equipment setup ...............................................
Outside scale vernier calipers..............................
Inside scale vernier calipers ................................
Outside function dial and digital calipers .............
Inside function dial and digital calipers...............
Depth function dial and digital ............................
Final procedure ..................................................
__________
This bulletin supersedes TB 9-5210-208-35, dated 30 October 1988.
