APPENDIX A. TEST DATA SHEET BORESIGHT COLLIMATOR TEST SET

Calibration Procedure For Test Set, Boresight Collimator, Ts-3784/Tas Page Navigation
20

TB 9-5855-1891-40

APPENDIX A

(Continued)

LAB STANDARD MIRROR IN PLACE

HORIZONTAL (ARC

VERTICAL (ARC

SECONDS)

WINDOW 1 (UPPER)

1. ________________________

2. ________________________

3. ________________________

__________________________

5. ________________________

AVERAGE _______________

STD DEV ________________

WINDOW 2 (MIDDLE)

1. ________________________

2. ________________________

3. ________________________

4. ________________________

5. ________________________

AVERAGE _______________

STD DEV ________________

WINDOW 3 (BOTTOM)

1. ________________________

2. ________________________

3. ________________________

4. ________________________

5. ________________________

AVERAGE _______________

STD DEV ________________

COMPUTATIONS:

HORIZONTAL DIFFERENCES

(AVG WINDOW 1) - (AVG WINDOW 2) = __________________________________

(H3)

AVG WINDOW 1) - (AVG WINDOW 3) = ___________________________________

(H4)

VERTICAL DIFFERENCES

(AVG WINDOW 1) - (AVG WINDOW 2) = __________________________________

(V3)

(AVG WINDOW 1) - (AVG WINDOW 3) = __________________________________

(V4)

DIFFERENCES BETWEEN MIRRORS

NOTE:

HORIZONTALS

If STD DEV (standard

Hl - H3= ____________________________________________ (X1)

deviation) equals 1.0 or

H2 - H4= ____________________________________________(X2)

greater, this indicates a

VERTICALS

probable error in taking the

V1 - V3 =____________________________________________(Y1)

readings. Repeat the test.

V2 - V4= ____________________________________________(Y2)

(WINDOW 1 - WINDOW 2) DEVIATION _______ X12 + Y12

>3.71 = Fail

(WINDOW 1 - WINDOW 3) DEVIATION _______ X22 + Y22

= >3.71 = Fail

A-2

Privacy Statement
Press Release
Contact