TB 9-5985-314-35
Connect TI into figure 7 equipment setup as listed in (a) through (c) below:
(a) OUTPUT PORT to POINT A.
(b) INPUT PORT to POINT B.
(c) SIDE PORT to 50 Ω termination.
(27) Measuring receiver indication will be 20 dB or greater.
(28) Repeat steps (17) through (24) but replace step (20) with the following:
Connect TI into figure 7 equipment setup as listed in (a) through (c) below:
(a) OUTPUT PORT to POINT A.
(b) SIDE PORT to POINT B.
(c) INPUT PORT to 50 Ω termination.
(29) Measuring receiver indication will be 0.5 dB or less.
(30) Repeat steps (17) through (24) but replace step (20) with the following:
Connect TI into figure 7 equipment setup as listed in (a) through (c) below:
(a) SIDE PORT to POINT A.
(b) OUTPUT PORT to POINT B.
(c) INPUT PORT to 50 Ω termination.
(31) Measuring receiver indication will be 20 dB or greater.
(32) Repeat steps (17) through (24) but replace step (20) with the following:
Connect TI into figure 7 equipment setup as listed in (a) through (c below:
(a) SIDE PORT to POINT A.
(b) INPUT PORT to POINT B.
(c) OUTPUT PORT to 50 Ω termination.
(33) Measuring receiver indication will be 0.5 dB or less.
(34) Repeat steps (17) through (24) but replace step (20) with the following:
Connect TI into figure 7 equipment setup as listed in (a) through (c) below:
(a) INPUT PORT to POINT A.
(b) SIDE PORT to POINT B.
G-3
