TB 9-6625-011-35
(5) Adjust R7 (R626 for TIs with amplifier board A6, P/N 03400-66512) (fig. 1) until
TI indicates 0.01 V (1 /10 scale) (R).
(6) Set RANGE switch to .01 VOLTS.
(7) Repeat (3) through (6) above until no further adjustment is necessary.
(8) Set calibrator for a 1.0 V, 400 Hz output. Adjust R104 (fig. 1) until TI indicates 1 (R).
(9) Set calibrator for an initial 900 V, 1 kHz wideband output, then adjust for the
TI indication record for table 3 (0.0009 V).
(10) Press calibrator NEW REF pushbutton, then set frequency to 10 MHz. Adjust
C405 (fig. 1) for the 1 kHz reference established in b (9) above (R).
(11) Vary calibrator frequency between 3 and 10 MHz and if required, readjust C405
7
