TB 9-6625-1314-35
(31)
djust dc voltage standard or electrical test set for an output of 80.00 mV.
Set RANGE
(33)
(34)
ut and repeat
(35)
indicates between 79.99 and 80.01 for both positive and negative outputs of dc voltage
9.
a.
eck
Set TI RANGE switch to 100 MV.
If necessary, adjust front panel ZERO
(2)
adjustment to obtain an indication of 8000 on TI. Release INT CHECK 8000 pushbutton.
Set FUNCTION switch to OHMS and RANGE switch to 1000 (ohms).
Connect decade resistance standard (A8) to TI INPUT terminals, using leads
(5)
00.0 on TI.
decade resistance standard does not indicate between. 99.60 and 100.40 ohms, perform (1)
(6)
listed in table 7. If decade resistance standard does not indicate within limits specified,
b
