DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
MULTIMETER, TEKTRONIX TYPES DM 501,
DM 501A, AND DM 501AOPT02 WITH DC
HIGH VOLTAGE PROBE, BALLANTINE,
MODEL 10800C; FLUKE, MODEL 80K-40;
AND TEKTRONIX, TYPE 010-0277-00
Headquarters, Department of the Army, Washington, DC
29 January 2008
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to improve these
procedures, please let us know. Mail your letter or DA Form 2028 (Recommended Changes to
Publications and Blank Forms) directly to: Commander, U.S. Army Aviation and Missile Command,
ATTN: AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5000. A reply will be furnished to
you.
You may also send in your comments electronically to our E-mail address:
2028@redstone.army.mil or by fax 256-842-6546/DSN 788-6546. For the World Wide Web use:
https://amcom2028.redstone.army.mil. Instructions for sending an electronic 2028 can be found at
the back of this manual.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification ........................
Forms, records, and reports ................................
Calibration description ........................................
EQUIPMENT REQUIREMENTS
Equipment required.............................................
Accessories required ............................................
CALIBRATION PROCESS FOR
MULTIMETER TEKTRONIX, TYPE DM 501
Preliminary instructions .....................................
_________
*This bulletin supersedes TB 9-6625-1957-35, dated 5 May 2004, including all changes.