Power Supply - TB-9-6625-2004-350009

TB-9-6625-2004-35 Modulatiom Meters ME-57/U and ME-57A/U Manual
Page Navigation
9

TB 9-6625-2004-35

13. Power Supply

NOTE

Do not perform power supply check if all other parameters are

within tolerance.

a. Performance Check. Connect multimeter INPUT HI to pin 6 of V15 (fig. 1) and

LO to chassis ground. If multimeter does not indicate between 189.15 and 200.85 V dc,

perform b below.

b. Adjustments.

Adjust VOLTS ADJ R127 (fig. 1) for a 195 V dc multimeter

indication (R).

14. Final Procedure

a. Deenergize and disconnect all equipment.

b. Annotate and affix DA label/form in accordance with TB 750-25.

9/(10 Blank)

Privacy Statement
Press Release
Contact