DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR CRYSTAL
OSCILLATOR, FREQUENCY ELECTRONICS, MODEL
FE2133A, VECTRON LABORATORIES, MODELS 244-
4799 AND 207-6192, AND RUBIDIUM OSCILLATOR,
EFRATOM, MODEL M-100
Headquarters, Department of the Army, Washington, DC
10 August 2007
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter or DA Form 2028
(Recommended Changes to Publications and Blank Forms) directly to Commander,
US Army Aviation and Missile Command, ATTN: AMSAM-MMC-MA-NP, Redstone
Arsenal, AL 35898-5000. A reply will be furnished to you. You may also provide DA
Form 2028 information to AMCOM via e-mail, fax, or the World Wide Web. Our
FAX number is: DSN 788-6546 or Commercial 256-842-6546. Our e-mail address is:
2028@redstone.army.mil. Instructions for sending an electronic 2028 may be found
at the back of this manual.
For the World Wide Web, use:
https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification .........................
Forms, records, and reports .............................
Calibration description .....................................
EQUIPMENT REQUIREMENTS
Equipment required..........................................
Accessories required .........................................
CALIBRATION PROCESS FOR
FREQUENCY ELECTRONICS, MODEL
FE2133A, AND VECTRON
LABORATORIES, MODEL 244-4799
Preliminary instructions ..................................
Equipment setup...............................................
Frequency stability ...........................................
Output power
Final procedure
_________
*This bulletin supersedes TB 9-6625-2080-35, dated 2 January 1987, including all changes.