TB 9-6625-2309-35
(6) Install A/D SHORTING PLUG (LPTF-1047) on J1 (fig. 17).
COAX CONNECTOR AND CABLE
A/D SHORTING PLUG
(LPTF-1047)
TP1
TP2
J1
U4
R21
U15
R6
R1
JP2
24
24
ICU5
23 ICU6
12
12
U16
ELECTRICAL
SHUNT
(7) Install A/D extender card (LPTF-1048) into TI A/D 1A2A8 mother board
connector.
(8) Install A/D 1A2A8 circuit board on extender card.
(9) Connect GROUNDING BRAID (fig. 15) to TI chassis using jumper wire.
NOTE
Allow 15 minutes for TI to warm-up before making voltage
measurements.
c. Set ON-OFF switch to ON.
d. Connect multimeter negative lead to ICU6, pin
12, and
positive lead to ICU6, pin 23
30
PIN: 073944-001