*TB 9-6625-2324-35
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
TRUE RMS VOLTMETER
JOHN FLUKE, MODELS
8922A AND 8922A/AA
Headquarters, Department of the Army, Washington, DC
17 August 2001
Approved for public release, distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this manual. If you find any mistakes or if you know of any way to
improve the procedures, please let us know. Mail your letter, DA Form 2028 (Recommended
Changes to Publications and Blank Forms), direct to: Commander U. S. Army Aviation and
Missile Command, ATTN: AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5230. A reply
will be furnished to you. You may also send in your comment electronically to our e mail
-
address: 2028@redstone.army.mil or by fax 256-842-6546/DSN 788-6546. Instructions for
sending an electronic 2028 may be found at the back of this procedure.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification .............................
Forms, records, and reports ................................
Calibration description ........................................
EQUIPMENT REQUIREMENTS
Equipment required............................................
Accessories required............................................
CALIBRATION PROCESS
Preliminary instructions.....................................
Equipment setup ................................................
Low and midband accuracy................................
High frequency response .....................................
dB display mode..................................................
Linear analog output ..........................................
Power supply......................................................
Final procedure ..................................................
__________
∗ This bulletin and TB 9-6625-2325-35 supersede TB 9-6695-258-35, dated 28 August 1995.
