TB 9-6625-2340-35
(5) Connect multimeter HI to A1A6TP3 (fig. 31) and multimeter LO to TI chassis.
(6) The +15 V indicator A1A6DS1 (fig. 31) (yellow LED) should be lit.
(7) Adjust A1A6R9 (fig. 31) for a multimeter indication of 15.000 0.010 V dc (R).
(8) Connect multimeter HI to A1A6TP4 (fig. 31) and multimeter LO to TI chassis.
(9) The -15V indicator A1A6DS2 (fig. 31) (yellow LED) should be lit.
(10) Multimeter should indicate -15.000 0.050 V dc.
(11) Connect multimeter HI to A1A7TP3 (fig. 32) and multimeter LO to TI chassis.
Figure 32. A1A7 Board
(12) The 120 V indicator A1A7DS1 should be lit.
(13) Multimeter should indicate 120.0 2.0 Vdc.
(14) Connect multimeter HI to A1A7TP2 and multimeter LO to TI chassis.
(15) The 5.2 V indicator A1A7DS1 (fig. 32) (yellow LED) should be lit.
(16) Multimeter should indicate 5.200 0.050 V dc.
(17) Disconnect multimeter from TI.
(18) Position TI on its right side.
(19) Remove TI bottom cover.
(20) Connect multimeter HI to A8TP1 (fig. 33) and multimeter LO to TI chassis.
