TB 9-6625-2342-35
Table 8. MODE B Horizontal Linearity Accuracy - Continued
1.0
s/div
s/div
20
20
1.0
s/div
s/div
50
50
.1
ms/div
1.0
s/div
100
.2
ms/div
1.0
s/div
200
.5
ms/div
1.0
s/div
500
1
ms/div
1
ms/div
1.0
2
ms/div
2
ms/div
1.0
5
ms/div
5
ms/div
1.0
10
ms/div
10
ms/div
1.0
20
ms/div
20
ms/div
1.0
50
ms/div
50
ms/div
1.0
.1
s/div
100
ms/div
1.0
.2
s/div
200
ms/div
1.0
.5
s/div
500
ms/div
1.0
13. Time Cursor Accuracy
a. Press PRGM button then press RECALL button in main menu.
b. Use arrow labeled switches to underline FPNL.
c. Press RECALL button.
d. Rotate CH 1 VOLTS/DIV knob for a 1 V indication on CRT display.
e. Rotate CH 2 VOLTS/DIV knob for a 2 V indication on CRT display.
f. Select CURSOR FUNCTION and set TIME.
g. Rotate CURSOR/DELAY control to align active cursor to 3d vertical graticule line.
h. Select CURSOR SELECT.
i. Rotate CURSOR/DELAY control to align active cursor to 9th vertical graticule line.
j.
TI cursor time readout will indicate between 2.9700 and 3.0300 ms.
k. Select HORIZONTAL MODE B (do not change cursor position).
l.
TI cursor time readout will indicate between 2.9700 and 3.0300 ms.
m. Set all outputs to minimum and disconnect equipment setup.
CHANGE 1 13
